ODU302
4G Industrial
屋外用ルーター
The ODU302 combines built-in antennas, PoE, link redundancy, and IP65 protection for fast outdoor deployment and reliable connectivity. Device Manager enables centralized remote management.（coming soon）
ODU302 4G Industrial Outdoor Router
The ODU302 combines built-in antennas, PoE, link redundancy, and IP65 protection for fast outdoor deployment and reliable connectivity. Device Manager enables centralized remote management.
写真
An All-in-One 4G Outdoor Router for Distributed Sites
All-in-One Antenna Design
Combines the router and antennas in a sealed enclosure, eliminating external antenna installation and simplifying deployment.
Reduced Signal Loss
Integrated antennas avoid long RF feeder cables, helping preserve cellular signal quality and connection stability.
Flexible PoE Deployment
IEEE 802.3af PoE carries power and data over one cable, with 9–36 V DC input for added flexibility.
Resilient Connectivity
Dual-SIM failover, cellular and wired backup, heartbeat monitoring, and a hardware watchdog help keep services online.
Secure Remote Networking
A stateful firewall and multiple VPN protocols protect business data and enable secure remote connectivity.
Cloud-Managed Outdoor Reliability
IP65 protection and a -20°C to +70°C operating range support outdoor deployment, while Device Manager enables centralized monitoring, configuration, upgrades, and alerts.
-
主な機能
Built for Outdoors IP65 protection, -20 °C ~ +70 °C operating rangeクラウド管理型 InHand Device Manager for remote monitoring, configuration, and OTA firmware upgradesDual SIM 4G LTE Redundancy Dual Nano SIM failover with intelligent switching for 24/7 uptimeエンタープライズセキュリティ SPI firewall, ACL, IPsec, OpenVPN, WireGuard, ZeroTierPoE Single-Cable IEEE 802.3af PoE input delivers power and data over one Ethernet cable; DC 9–36 V also availableRouter + Antenna Integrated One SKU, one top-mount installation — no separate outdoor antenna to source or matchZero Feeder Loss RF module adjacent to the antenna eliminates coax attenuation for stronger 4G signal
-
Hardware Overview
4G Antennas 2 × built-in 4G antennas (ANT_4G_1, ANT_4G_2)4G Module 4G LTE Cat.4, DL 150 Mbps / UL 50 MbpsデジタルI/O 2 × configurable DI or DO寸法 164 × 50 × 129.7 mm (6.46 × 1.97 × 5.11 in)筐体材質 Industrial-grade plasticイーサネットポート 2 × 10/100 Mbps RJ45, WAN/LAN switchable. LAN2 supports PoELEDインジケーター System, Wi-Fi, Cellular, Ethernetメモリ 128 MB DDR2 SDRAM取り付け Wall, pole, top-mount動作電力 280~300 mA @ 12 V動作温度 -20 °C ~ +70 °C (-4 °F ~ +158 °F)ピークパワー 340~360 mA @ 12 V電源 DC 9–36 V (4-pin 2×2 combined power & I/O terminal, over-current / reverse-polarity protected) IEEE 802.3af PoE input (Mode A or Mode B)プロセッサ 580MHz保護等級 IP65推奨ユーザー 32相対湿度 5%～95%、非凝縮型リセットボタン ピンホールリセットボタンSIMスロット 2 × Nano SIM (drawer-style), dual SIM failover待機電力 90~110 mA @ 12 Vストレージ 32 MB SPI NOR Flash保管温度 -40 °C ~ +85 °C (-40 °F ~ +185 °F)重さ Approx. 500 g (1.10 lb)Wi-Fi IEEE 802.11 b/g/n (Wi-Fi 4), 2.4 GHz, up to 150 MbpsWi-Fiアンテナ 1 × built-in Wi-Fi antennaWi-Fi TX Power 802.11b: 16 dBm ± 2 dBm (11 Mbps) 802.11g: 16 dBm ± 2 dBm (54 Mbps) [email protected] GHz HT20 MCS7: 16 dBm ± 2 dBm [email protected] GHz HT40 MCS7: 16 dBm ± 2 dBm
-
RJ45 Ports
LAN2 (Middle) LANWAN/LAN1 (Left) WAN/LAN
-
SIM Card Slots
SIM1 (Top) Primary SIM card (Nano SIM, drawer-style)SIM2 (Bottom) Backup SIM card (Nano SIM, drawer-style)
-
Environment & Reliability
Conducted RF EN 61000-4-6EFT/バースト EN 61000-4-4ESD EN 61000-4-2自由落下 IEC 60068-2-32Oscillatory Wave EN 61000-4-12Power Frequency Magnetic EN 61000-4-8Radiated RF EN 61000-4-3ショック IEC 60068-2-27うねり EN 61000-4-5振動 IEC 60068-2-6
-
Device Manager Cloud Management
Alert Types System reboot, LAN port up/down, traffic alarm, SIM card faultBatch Operations Mass device configuration and maintenanceDevice Onboarding Device Manager cloud platform and custom server supportNotification Email alerts (configurable)リモート管理 Device status query, remote configuration push, firmware upgrade, remote rebootSNMP SNMP v1/v2c/v3 with Trap support交通管理 Traffic thresholds, statistics, and alarms
-
Mechanical Reliability
自由落下 IEC 60068-2-32ショック IEC 60068-2-27振動 IEC 60068-2-6
-
EMC Immunity
Conducted RF EN 61000-4-6, Level 2EFT/バースト EN 61000-4-4, Level 2ESD EN 61000-4-2, Level 2Oscillatory Wave EN 61000-4-12, Level 2Power Frequency Magnetic EN 61000-4-8, 400 A/mRadiated RF EN 61000-4-3, Level 2うねり EN 61000-4-5, Level 2
-
Certifications & Compliance
AT&T CompletedFCC CompletedIC CompletedPTCRB CompletedT-モバイル Completedベライゾン Completed
標準パッケージ*
- ODU302 Outdoor Router ×1
- 1m Ethernet Cable ×1
- Wall‑mount Bracket ×1
- Pole‑mount Clamp ×1
- SIM Eject Pin ×1
- Outdoor Waterproof Connector ×2
- Outdoor Waterproof Cover ×2
- Outdoor Waterproof Nut ×1
- Expansion Bolts and Screws Set ×1
※標準パッケージの内容は、標準クレジットカードコードによって異なります。
オプションアクセサリー
- DC Power Adapter ×1
- PoE Injector ×1
- AC Power Cord ×1
お問い合わせ パッケージオプションの詳細については、直接お問い合わせください。
仕様
-
主な機能
Built for Outdoors IP65 protection, -20 °C ~ +70 °C operating rangeクラウド管理型 InHand Device Manager for remote monitoring, configuration, and OTA firmware upgradesDual SIM 4G LTE Redundancy Dual Nano SIM failover with intelligent switching for 24/7 uptimeエンタープライズセキュリティ SPI firewall, ACL, IPsec, OpenVPN, WireGuard, ZeroTierPoE Single-Cable IEEE 802.3af PoE input delivers power and data over one Ethernet cable; DC 9–36 V also availableRouter + Antenna Integrated One SKU, one top-mount installation — no separate outdoor antenna to source or matchZero Feeder Loss RF module adjacent to the antenna eliminates coax attenuation for stronger 4G signal
-
Hardware Overview
4G Antennas 2 × built-in 4G antennas (ANT_4G_1, ANT_4G_2)4G Module 4G LTE Cat.4, DL 150 Mbps / UL 50 MbpsデジタルI/O 2 × configurable DI or DO寸法 164 × 50 × 129.7 mm (6.46 × 1.97 × 5.11 in)筐体材質 Industrial-grade plasticイーサネットポート 2 × 10/100 Mbps RJ45, WAN/LAN switchable. LAN2 supports PoELEDインジケーター System, Wi-Fi, Cellular, Ethernetメモリ 128 MB DDR2 SDRAM取り付け Wall, pole, top-mount動作電力 280~300 mA @ 12 V動作温度 -20 °C ~ +70 °C (-4 °F ~ +158 °F)ピークパワー 340~360 mA @ 12 V電源 DC 9–36 V (4-pin 2×2 combined power & I/O terminal, over-current / reverse-polarity protected) IEEE 802.3af PoE input (Mode A or Mode B)プロセッサ 580MHz保護等級 IP65推奨ユーザー 32相対湿度 5%～95%、非凝縮型リセットボタン ピンホールリセットボタンSIMスロット 2 × Nano SIM (drawer-style), dual SIM failover待機電力 90~110 mA @ 12 Vストレージ 32 MB SPI NOR Flash保管温度 -40 °C ~ +85 °C (-40 °F ~ +185 °F)重さ Approx. 500 g (1.10 lb)Wi-Fi IEEE 802.11 b/g/n (Wi-Fi 4), 2.4 GHz, up to 150 MbpsWi-Fiアンテナ 1 × built-in Wi-Fi antennaWi-Fi TX Power 802.11b: 16 dBm ± 2 dBm (11 Mbps) 802.11g: 16 dBm ± 2 dBm (54 Mbps) [email protected] GHz HT20 MCS7: 16 dBm ± 2 dBm [email protected] GHz HT40 MCS7: 16 dBm ± 2 dBm
-
RJ45 Ports
LAN2 (Middle) LANWAN/LAN1 (Left) WAN/LAN
-
SIM Card Slots
SIM1 (Top) Primary SIM card (Nano SIM, drawer-style)SIM2 (Bottom) Backup SIM card (Nano SIM, drawer-style)
-
Environment & Reliability
Conducted RF EN 61000-4-6EFT/バースト EN 61000-4-4ESD EN 61000-4-2自由落下 IEC 60068-2-32Oscillatory Wave EN 61000-4-12Power Frequency Magnetic EN 61000-4-8Radiated RF EN 61000-4-3ショック IEC 60068-2-27うねり EN 61000-4-5振動 IEC 60068-2-6
-
Device Manager Cloud Management
Alert Types System reboot, LAN port up/down, traffic alarm, SIM card faultBatch Operations Mass device configuration and maintenanceDevice Onboarding Device Manager cloud platform and custom server supportNotification Email alerts (configurable)リモート管理 Device status query, remote configuration push, firmware upgrade, remote rebootSNMP SNMP v1/v2c/v3 with Trap support交通管理 Traffic thresholds, statistics, and alarms
-
Mechanical Reliability
自由落下 IEC 60068-2-32ショック IEC 60068-2-27振動 IEC 60068-2-6
-
EMC Immunity
Conducted RF EN 61000-4-6, Level 2EFT/バースト EN 61000-4-4, Level 2ESD EN 61000-4-2, Level 2Oscillatory Wave EN 61000-4-12, Level 2Power Frequency Magnetic EN 61000-4-8, 400 A/mRadiated RF EN 61000-4-3, Level 2うねり EN 61000-4-5, Level 2
-
Certifications & Compliance
AT&T CompletedFCC CompletedIC CompletedPTCRB CompletedT-モバイル Completedベライゾン Completed
ダウンロード
注文
標準パッケージ*
- ODU302 Outdoor Router ×1
- 1m Ethernet Cable ×1
- Wall‑mount Bracket ×1
- Pole‑mount Clamp ×1
- SIM Eject Pin ×1
- Outdoor Waterproof Connector ×2
- Outdoor Waterproof Cover ×2
- Outdoor Waterproof Nut ×1
- Expansion Bolts and Screws Set ×1
※標準パッケージの内容は、標準クレジットカードコードによって異なります。
オプションアクセサリー
- DC Power Adapter ×1
- PoE Injector ×1
- AC Power Cord ×1
お問い合わせ パッケージオプションの詳細については、直接お問い合わせください。
関連事例
Warehousing & Logistics Park — Scanning & CCTV Connectivity in Steel-Frame Facilities
Keep scanning fast and footage intact in steel-frame warehouses. Mounted on the…
詳細はこちら →
Construction-Site Security Surveillance — Site-Office & Pole Camera Networking
Give every site "an office with Wi-Fi and surveillance that never drops."…
詳細はこちら →
Underground-Parking EV Charging — Entrance Deployment Bridges the Charger Data Link
InHand ODU302 outdoor 4G router delivers reliable EV charging connectivity with LTE…
詳細はこちら →よくある質問
What is the ODU302, and how is it different from a standard indoor router?
The ODU302 is an industrial-grade outdoor 4G wireless router that integrates a high-performance router with high-gain cellular and Wi-Fi antennas in a single IP65-rated enclosure.
It can be mounted directly on top of ATMs, EV chargers, self-service terminals, or control cabinets, helping reduce the space, installation effort, and signal loss associated with cabinet-mounted routers, external antennas, and long RF feeder cables.
What are the typical applications for the ODU302?
Typical applications include:
- Financial self-service equipment, such as ATMs
- Smart energy equipment, such as outdoor EV chargers
- Self-service retail equipment, such as vending machines
- Outdoor industrial control cabinets
These applications typically require outdoor protection, compact installation, reduced feeder loss, fast deployment, dual-link or dual-SIM redundancy, and centralized remote management at scale.
What are the benefits of the all-in-one antenna and router design and “zero feeder loss”?
The ODU302 integrates the RF module and optimized built-in antennas into the same outdoor unit, eliminating the need for long coaxial feeder cables between an indoor router and external antennas.
This helps reduce feeder attenuation in high-frequency LTE applications, while also simplifying antenna selection, wall penetration, cabling, cabinet space requirements, and on-site installation.
“Zero feeder loss” refers specifically to the benefit of eliminating external long feeder cables. It does not mean that the wireless link is free from propagation loss or environmental interference. Actual performance still depends on factors such as carrier coverage, frequency bands, installation location, and surrounding obstructions.
Can the ODU302 use a single Ethernet cable for both power and data?
Yes. The ODU302 is an IEEE 802.3af-compliant PoE powered device (PD). Its LAN2 port supports both power and data transmission over a single Ethernet cable.
The device also supports 9–36 V DC input via an industrial terminal block, allowing users to choose the most suitable power option based on site conditions.
For PoE deployments, the power sourcing equipment, cable length, wire gauge, and voltage drop should still be checked against IEEE 802.3af requirements and actual installation conditions.