ODU302
4G Industrial
جهاز توجيه خارجي
The ODU302 combines built-in antennas, PoE, link redundancy, and IP65 protection for fast outdoor deployment and reliable connectivity. Device Manager enables centralized remote management.（coming soon）
ODU302 4G Industrial Outdoor Router
The ODU302 combines built-in antennas, PoE, link redundancy, and IP65 protection for fast outdoor deployment and reliable connectivity. Device Manager enables centralized remote management.
صورة
An All-in-One 4G Outdoor Router for Distributed Sites
All-in-One Antenna Design
Combines the router and antennas in a sealed enclosure, eliminating external antenna installation and simplifying deployment.
Reduced Signal Loss
Integrated antennas avoid long RF feeder cables, helping preserve cellular signal quality and connection stability.
Flexible PoE Deployment
IEEE 802.3af PoE carries power and data over one cable, with 9–36 V DC input for added flexibility.
Resilient Connectivity
Dual-SIM failover, cellular and wired backup, heartbeat monitoring, and a hardware watchdog help keep services online.
Secure Remote Networking
A stateful firewall and multiple VPN protocols protect business data and enable secure remote connectivity.
Cloud-Managed Outdoor Reliability
IP65 protection and a -20°C to +70°C operating range support outdoor deployment, while Device Manager enables centralized monitoring, configuration, upgrades, and alerts.
-
الميزات الرئيسية
Built for Outdoors IP65 protection, -20 °C ~ +70 °C operating rangeمُدارة عبر السحابة InHand Device Manager for remote monitoring, configuration, and OTA firmware upgradesDual SIM 4G LTE Redundancy Dual Nano SIM failover with intelligent switching for 24/7 uptimeأمن المؤسسات SPI firewall, ACL, IPsec, OpenVPN, WireGuard, ZeroTierPoE Single-Cable IEEE 802.3af PoE input delivers power and data over one Ethernet cable; DC 9–36 V also availableRouter + Antenna Integrated One SKU, one top-mount installation — no separate outdoor antenna to source or matchZero Feeder Loss RF module adjacent to the antenna eliminates coax attenuation for stronger 4G signal
-
Hardware Overview
4G Antennas 2 × built-in 4G antennas (ANT_4G_1, ANT_4G_2)4G Module 4G LTE Cat.4, DL 150 Mbps / UL 50 Mbpsالإدخال/الإخراج الرقمي 2 × configurable DI or DOأبعاد 164 × 50 × 129.7 mm (6.46 × 1.97 × 5.11 in)مواد التغليف Industrial-grade plasticمنافذ إيثرنت 2 × 10/100 Mbps RJ45, WAN/LAN switchable. LAN2 supports PoEمؤشرات LED System, Wi-Fi, Cellular, Ethernetذاكرة 128 MB DDR2 SDRAMالتركيب Wall, pole, top-mountالطاقة التشغيلية 280~300 mA @ 12 Vدرجة حرارة التشغيل -20 °C ~ +70 °C (-4 °F ~ +158 °F)ذروة الطاقة 340~360 mA @ 12 Vمزود الطاقة DC 9–36 V (4-pin 2×2 combined power & I/O terminal, over-current / reverse-polarity protected) IEEE 802.3af PoE input (Mode A or Mode B)المعالج 580 ميجاهرتزتصنيف الحماية IP65المستخدمون الموصى بهم 32الرطوبة النسبية 5% ~ 95%، غير مكثفزر إعادة الضبط زر إعادة الضبط ذو الثقب الصغيرفتحات شريحة SIM 2 × Nano SIM (drawer-style), dual SIM failoverطاقة الاستعداد 90~110 mA @ 12 Vتخزين 32 MB SPI NOR Flashدرجة حرارة التخزين -40 °C ~ +85 °C (-40 °F ~ +185 °F)وزن Approx. 500 g (1.10 lb)واي فاي IEEE 802.11 b/g/n (Wi-Fi 4), 2.4 GHz, up to 150 Mbpsهوائيات الواي فاي 1 × built-in Wi-Fi antennaWi-Fi TX Power 802.11b: 16 dBm ± 2 dBm (11 Mbps) 802.11g: 16 dBm ± 2 dBm (54 Mbps) [email protected] GHz HT20 MCS7: 16 dBm ± 2 dBm [email protected] GHz HT40 MCS7: 16 dBm ± 2 dBm
-
RJ45 Ports
LAN2 (Middle) شبكة محليةWAN/LAN1 (Left) WAN/LAN
-
SIM Card Slots
SIM1 (Top) Primary SIM card (Nano SIM, drawer-style)SIM2 (Bottom) Backup SIM card (Nano SIM, drawer-style)
-
Environment & Reliability
Conducted RF EN 61000-4-6EFT/Burst EN 61000-4-4التفريغ الكهروستاتيكي EN 61000-4-2السقوط الحر IEC 60068-2-32Oscillatory Wave EN 61000-4-12Power Frequency Magnetic EN 61000-4-8Radiated RF EN 61000-4-3صدمة IEC 60068-2-27طفرة EN 61000-4-5اهتزاز IEC 60068-2-6
-
Device Manager Cloud Management
Alert Types System reboot, LAN port up/down, traffic alarm, SIM card faultBatch Operations Mass device configuration and maintenanceDevice Onboarding Device Manager cloud platform and custom server supportNotification Email alerts (configurable)الإدارة عن بعد Device status query, remote configuration push, firmware upgrade, remote rebootبروتوكول إدارة الشبكة البسيط (SNMP) SNMP v1/v2c/v3 with Trap supportإدارة حركة المرور Traffic thresholds, statistics, and alarms
-
Mechanical Reliability
السقوط الحر IEC 60068-2-32صدمة IEC 60068-2-27اهتزاز IEC 60068-2-6
-
EMC Immunity
Conducted RF EN 61000-4-6, Level 2EFT/Burst EN 61000-4-4, Level 2التفريغ الكهروستاتيكي EN 61000-4-2, Level 2Oscillatory Wave EN 61000-4-12, Level 2Power Frequency Magnetic EN 61000-4-8, 400 A/mRadiated RF EN 61000-4-3, Level 2طفرة EN 61000-4-5, Level 2
-
Certifications & Compliance
شركة AT&T Completedلجنة الاتصالات الفيدرالية CompletedIC Completedمجلس مراجعة البرامج التلفزيونية Completedتي موبايل Completedفيريزون Completed
الباقة القياسية*
- ODU302 Outdoor Router ×1
- 1m Ethernet Cable ×1
- Wall‑mount Bracket ×1
- Pole‑mount Clamp ×1
- SIM Eject Pin ×1
- Outdoor Waterproof Connector ×2
- Outdoor Waterproof Cover ×2
- Outdoor Waterproof Nut ×1
- Expansion Bolts and Screws Set ×1
*تختلف محتويات العبوة القياسية باختلاف رموز الائتمان القياسية.
ملحقات اختيارية
- DC Power Adapter ×1
- PoE Injector ×1
- AC Power Cord ×1
اتصل بنا للحصول على مزيد من المعلومات حول خيارات التغليف لدينا، يرجى الاتصال بنا مباشرة.
تحديد
-
الميزات الرئيسية
Built for Outdoors IP65 protection, -20 °C ~ +70 °C operating rangeمُدارة عبر السحابة InHand Device Manager for remote monitoring, configuration, and OTA firmware upgradesDual SIM 4G LTE Redundancy Dual Nano SIM failover with intelligent switching for 24/7 uptimeأمن المؤسسات SPI firewall, ACL, IPsec, OpenVPN, WireGuard, ZeroTierPoE Single-Cable IEEE 802.3af PoE input delivers power and data over one Ethernet cable; DC 9–36 V also availableRouter + Antenna Integrated One SKU, one top-mount installation — no separate outdoor antenna to source or matchZero Feeder Loss RF module adjacent to the antenna eliminates coax attenuation for stronger 4G signal
-
Hardware Overview
4G Antennas 2 × built-in 4G antennas (ANT_4G_1, ANT_4G_2)4G Module 4G LTE Cat.4, DL 150 Mbps / UL 50 Mbpsالإدخال/الإخراج الرقمي 2 × configurable DI or DOأبعاد 164 × 50 × 129.7 mm (6.46 × 1.97 × 5.11 in)مواد التغليف Industrial-grade plasticمنافذ إيثرنت 2 × 10/100 Mbps RJ45, WAN/LAN switchable. LAN2 supports PoEمؤشرات LED System, Wi-Fi, Cellular, Ethernetذاكرة 128 MB DDR2 SDRAMالتركيب Wall, pole, top-mountالطاقة التشغيلية 280~300 mA @ 12 Vدرجة حرارة التشغيل -20 °C ~ +70 °C (-4 °F ~ +158 °F)ذروة الطاقة 340~360 mA @ 12 Vمزود الطاقة DC 9–36 V (4-pin 2×2 combined power & I/O terminal, over-current / reverse-polarity protected) IEEE 802.3af PoE input (Mode A or Mode B)المعالج 580 ميجاهرتزتصنيف الحماية IP65المستخدمون الموصى بهم 32الرطوبة النسبية 5% ~ 95%، غير مكثفزر إعادة الضبط زر إعادة الضبط ذو الثقب الصغيرفتحات شريحة SIM 2 × Nano SIM (drawer-style), dual SIM failoverطاقة الاستعداد 90~110 mA @ 12 Vتخزين 32 MB SPI NOR Flashدرجة حرارة التخزين -40 °C ~ +85 °C (-40 °F ~ +185 °F)وزن Approx. 500 g (1.10 lb)واي فاي IEEE 802.11 b/g/n (Wi-Fi 4), 2.4 GHz, up to 150 Mbpsهوائيات الواي فاي 1 × built-in Wi-Fi antennaWi-Fi TX Power 802.11b: 16 dBm ± 2 dBm (11 Mbps) 802.11g: 16 dBm ± 2 dBm (54 Mbps) [email protected] GHz HT20 MCS7: 16 dBm ± 2 dBm [email protected] GHz HT40 MCS7: 16 dBm ± 2 dBm
-
RJ45 Ports
LAN2 (Middle) شبكة محليةWAN/LAN1 (Left) WAN/LAN
-
SIM Card Slots
SIM1 (Top) Primary SIM card (Nano SIM, drawer-style)SIM2 (Bottom) Backup SIM card (Nano SIM, drawer-style)
-
Environment & Reliability
Conducted RF EN 61000-4-6EFT/Burst EN 61000-4-4التفريغ الكهروستاتيكي EN 61000-4-2السقوط الحر IEC 60068-2-32Oscillatory Wave EN 61000-4-12Power Frequency Magnetic EN 61000-4-8Radiated RF EN 61000-4-3صدمة IEC 60068-2-27طفرة EN 61000-4-5اهتزاز IEC 60068-2-6
-
Device Manager Cloud Management
Alert Types System reboot, LAN port up/down, traffic alarm, SIM card faultBatch Operations Mass device configuration and maintenanceDevice Onboarding Device Manager cloud platform and custom server supportNotification Email alerts (configurable)الإدارة عن بعد Device status query, remote configuration push, firmware upgrade, remote rebootبروتوكول إدارة الشبكة البسيط (SNMP) SNMP v1/v2c/v3 with Trap supportإدارة حركة المرور Traffic thresholds, statistics, and alarms
-
Mechanical Reliability
السقوط الحر IEC 60068-2-32صدمة IEC 60068-2-27اهتزاز IEC 60068-2-6
-
EMC Immunity
Conducted RF EN 61000-4-6, Level 2EFT/Burst EN 61000-4-4, Level 2التفريغ الكهروستاتيكي EN 61000-4-2, Level 2Oscillatory Wave EN 61000-4-12, Level 2Power Frequency Magnetic EN 61000-4-8, 400 A/mRadiated RF EN 61000-4-3, Level 2طفرة EN 61000-4-5, Level 2
-
Certifications & Compliance
شركة AT&T Completedلجنة الاتصالات الفيدرالية CompletedIC Completedمجلس مراجعة البرامج التلفزيونية Completedتي موبايل Completedفيريزون Completed
التنزيلات
الطلب
الباقة القياسية*
- ODU302 Outdoor Router ×1
- 1m Ethernet Cable ×1
- Wall‑mount Bracket ×1
- Pole‑mount Clamp ×1
- SIM Eject Pin ×1
- Outdoor Waterproof Connector ×2
- Outdoor Waterproof Cover ×2
- Outdoor Waterproof Nut ×1
- Expansion Bolts and Screws Set ×1
*تختلف محتويات العبوة القياسية باختلاف رموز الائتمان القياسية.
ملحقات اختيارية
- DC Power Adapter ×1
- PoE Injector ×1
- AC Power Cord ×1
اتصل بنا للحصول على مزيد من المعلومات حول خيارات التغليف لدينا، يرجى الاتصال بنا مباشرة.
مدير الجهاز
سحابة إدارة الأجهزة
إدارة مركزية لأجهزة التوجيه والبوابات الصناعية من InHand مع مراقبة مرئية، بالإضافة إلى سهولة التكوين والترقية عن بعد.
مدير الجهاز
قضايا ذات صلة
Warehousing & Logistics Park — Scanning & CCTV Connectivity in Steel-Frame Facilities
Keep scanning fast and footage intact in steel-frame warehouses. Mounted on the...
تعرّف على المزيد →
Construction-Site Security Surveillance — Site-Office & Pole Camera Networking
Give every site "an office with Wi-Fi and surveillance that never drops."...
تعرّف على المزيد →
Underground-Parking EV Charging — Entrance Deployment Bridges the Charger Data Link
InHand ODU302 outdoor 4G router delivers reliable EV charging connectivity with LTE...
تعرّف على المزيد →الأسئلة الشائعة
What is the ODU302, and how is it different from a standard indoor router?
The ODU302 is an industrial-grade outdoor 4G wireless router that integrates a high-performance router with high-gain cellular and Wi-Fi antennas in a single IP65-rated enclosure.
It can be mounted directly on top of ATMs, EV chargers, self-service terminals, or control cabinets, helping reduce the space, installation effort, and signal loss associated with cabinet-mounted routers, external antennas, and long RF feeder cables.
What are the typical applications for the ODU302?
Typical applications include:
- Financial self-service equipment, such as ATMs
- Smart energy equipment, such as outdoor EV chargers
- Self-service retail equipment, such as vending machines
- Outdoor industrial control cabinets
These applications typically require outdoor protection, compact installation, reduced feeder loss, fast deployment, dual-link or dual-SIM redundancy, and centralized remote management at scale.
What are the benefits of the all-in-one antenna and router design and “zero feeder loss”?
The ODU302 integrates the RF module and optimized built-in antennas into the same outdoor unit, eliminating the need for long coaxial feeder cables between an indoor router and external antennas.
This helps reduce feeder attenuation in high-frequency LTE applications, while also simplifying antenna selection, wall penetration, cabling, cabinet space requirements, and on-site installation.
“Zero feeder loss” refers specifically to the benefit of eliminating external long feeder cables. It does not mean that the wireless link is free from propagation loss or environmental interference. Actual performance still depends on factors such as carrier coverage, frequency bands, installation location, and surrounding obstructions.
Can the ODU302 use a single Ethernet cable for both power and data?
Yes. The ODU302 is an IEEE 802.3af-compliant PoE powered device (PD). Its LAN2 port supports both power and data transmission over a single Ethernet cable.
The device also supports 9–36 V DC input via an industrial terminal block, allowing users to choose the most suitable power option based on site conditions.
For PoE deployments, the power sourcing equipment, cable length, wire gauge, and voltage drop should still be checked against IEEE 802.3af requirements and actual installation conditions.