IR315
Industrierouter
Der IR315 ist ein vielseitiger Industrierouter mit mehreren Ports, der eine stabile, sichere und konforme Konnektivität für unbeaufsichtigte Standorte und eine effiziente Vernetzung in industriellen und kommerziellen IoT-Anwendungen bietet.
IR315
Industrierouter
Der IR315 ist ein vielseitiger Industrierouter mit mehreren Ports, der eine stabile, sichere und konforme Konnektivität für unbeaufsichtigte Standorte und eine effiziente Vernetzung in industriellen und kommerziellen IoT-Anwendungen bietet.
QSG-VIDEO
Industrieller Router mit mehreren Ports und vielseitigen Einsatzmöglichkeiten
Zuverlässiger Zugriff, jederzeit und überall
Der IR315 verbindet sich über Mobilfunk-, Kabel- oder WLAN-Netzwerke mit dem Internet und bietet flexible und zuverlässige Netzwerkdienste für vielfältige Geschäftsanwendungen.
Umfangreiche industrielle Schnittstellen
Der IR315 verfügt über fünf Ethernet-Ports und erweiterbare Schnittstellen wie RS485, RS232, I/O und GNSS und bietet so vielseitige und zuverlässige Konnektivität für IoT-Netzwerke.
Umfassende Sicherheitsstrategien
IR315 bietet umfassende Netzwerksicherheit mit Firewall, Zugriffskontrolle, VPN, Datenverschlüsselung und erweitertem Wi-Fi-Schutz für zuverlässige Konnektivität.
Zuverlässige und nahtlose Kommunikation
IR315 gewährleistet eine unterbrechungsfreie und zuverlässige Netzwerkverbindung mit Mobilfunk-, Kabel- und Wi-Fi-Backup, Dual-SIM, VRRP und mehrschichtiger Überwachung.
Stabilität und Zuverlässigkeit in Industriequalität
Der IR315 zeichnet sich durch ein industrietaugliches Design mit breitem Temperatur- und Spannungsbereich sowie hoher EMV-Beständigkeit für einen stabilen Betrieb auch unter rauen Umgebungsbedingungen aus.
Vereinfachtes Cloud-Management
Der IR315 verbindet sich mit der InHand Device Manager Cloud, um Tausende von verteilten Geräten in Echtzeit zu verwalten und so einen wirtschaftlichen und effizienten Betrieb zu ermöglichen.
-
Wichtigste technische Spezifikationen
Mobilfunknetz 5G NR (SA/NSA) or LTE (depending on model); dual Nano-SIM; supports PDP configuration (IPv4/IPv4V6)Cloud Management and Network Management Device Manager/ICS platform; SNMP v1/v2c/v3 (supports custom communication port), SNMP TRAPDimensions and Weight 127 × 108.2 × 35 mm (5 × 4.26 × 1.38 in); 454 g (1 lb)Dynamic Routing and High Availability Static/OSPF routing; VRRP (supports virtual MAC), link online detection, dual-SIM switching, SIM switching policy, embedded watchdogEthernet-Schnittstelle 5 × 10/100 Mbps RJ45, supports WAN/LAN/VLAN, 1.5KV network isolation transformer protectionFirewall and Access Control SPI stateful inspection, DoS protection, ACL, content filtering (domain auto-refresh), 802.1x, IP-MAC binding, MAC address filtering, etc.Betriebstemperatur Standard: -35 °C ~ 70 °C (-31 °F ~ 158 °F); Extended: -40 °C ~ 75 °C (-40 °F ~ 167 °F)Stromversorgung DC 9~36 V, overcurrent/reverse polarity protection, 2-pin industrial terminalSchutzklasse IP30Serial Port and IO (optional) 1×RS-232+1×RS-485 or 4×IO (depending on model)VPN IPsec (IKEv2, AES256-SHA512), PPTP, L2TP, GRE, DMVPN, OpenVPN, WireGuard, ZeroTierWi-Fi (optional) 2.4 GHz, IEEE 802.11 b/g/n, up to 300 Mbps
-
Product Innovation Summary
5G / RedCap Support Supports NRQ2, NRR0, NRR2 and other 5G modules, as well as NRF2/NRF4 and other RedCap modulesCloud Platform Management Multi-Cloud Platform AdaptationCompliance Adaptation Supports U.S. TAA Act requirements, automatic replacement of logo/domain/SSID/alarm pageConfiguration Integrity Configuration import/export verification, supports configuration files up to 128KBDDNS Enhancement Supports HTTPS DDNS updateDual-SIM Intelligent Switching Supports automatic SIM switching based on signal quality, ICMP detection, packet loss rate, dial failure count, and other strategiesEnhanced Tunnel Management Supports peer domain name, multiple remote subnets, independent start/stop control of single tunnelEnterprise Access Radius authentication, Wi-Fi user isolation, password show/hide, calibration data backupGlobal Operator Adaptation Automatically matches APN, BAND, IMS configurations for operators such as Verizon / AT&T / T-MobileGlobalization and OEM Multi-OEM CustomizationI/O Edge Control 4-channel digital I/O, relay output, I/O status reporting to cloud platform, alarm triggeringIndustrial IoT Protocols Industrial Serial Port / DTUIndustrial Reliability High Availability DesignLink Reliability Link Backup and Hot BackupLoad Balancing Multi-link load balancing optimization, improving bandwidth utilization and business continuityModern VPN Protocols Added WireGuard, ZeroTier to meet flexible networking needsMulti-Mode Cellular Communication Intelligent Dialing Mode AdaptationNetwork Diagnosis and Observation Built-in TCPDUMP, ping, traceroute, Qlog; cellular signal / GNSS parameter reportingNetzwerkmanagement Flexible Layer 2/Layer 3Network Security Access ZugangskontrolleO&M and Deployment FCT Factory TestO&M Command Enhancement Factory mode supports nvram / show / info version / net test / factory resetPermission and Encryption User permission management, HTTPS API, Wi-Fi password encryption, SSH login bannerSecure Registration and Authentication Supports MQTT/MQTTS, JWT registration, public/private key authentication, remote firmware upgradeSecurity Hardening Firmware SecuritySoftware Component Upgrade Continuous updates of OpenSSL, OpenVPN, curl, tcpdump, dnsmasq, mosquitto, busybox, etc.State Grid Encryption Supports IEC101/IEC104/DC protocol state cryptography encryption, model 305NRQ2-SECVPN Technology Matrix Full-Protocol VPN SupportVulnerability Repair Continuously fixes CVE, Talos, Fortinet, CISA and other disclosed vulnerabilitiesWLAN Capability Multi-Mode Wi-Fi
-
CPU und Speicher
CPU 580 MHzBlitz 64 MB SPIRAM 128 MB DDR2
-
Konnektivität und Schnittstellen
Antennenanschlüsse 5G: SMA ×2; 4G: SMA ×1 (overseas 4G models are SMA ×2); Wi-Fi: RP-SMA ×2Ethernet-Anschlüsse 5 × 10/100 Mbps RJ45, supports WAN/LAN/VLAN, 1.5KV network isolation transformer protectionGNSS (optional) Some models support (see ordering information )Grounding Terminal UnterstütztI/O Port (optional) 4 × IO (DI/DO configurable)LED-Anzeigen Power, System, Network, Wi-Fi, SignalStromschnittstelle DC 9~36V, overcurrent/reverse polarity protection, 2-pin industrial terminalReset-Taste Reset-Taste mit LochblendeSerial Port (optional) 1 × RS-232 + 1 × RS-485SIM-Kartensteckplatz Drawer-type slot ×1, supports 2 × Nano-SIM
-
W-lan
10m Suction cup antenna: 90.96 Mbps (signal -54 dBm); Rod antenna: 90.74 Mbps (signal -45 dBm)1m Suction cup antenna: 91.26 Mbps (signal -36 dBm); Rod antenna: 90.22 Mbps (signal -25 dBm)30m Suction cup antenna: 1.28 Mbps (signal -62 dBm); Rod antenna: 7.20 Mbps (signal -64 dBm)5m Suction cup antenna: 90.25 Mbps (signal -47 dBm); Rod antenna: 90.30 Mbps (signal -38 dBm)Maximum Transmission Rate 300 Mbit/sProtokoll IEEE 802.11 b/g/nRadiofrequenz 2,4 GHzÜbertragungsdistanz Approx. 50 meters line-of-sight (affected by site environment)Sendeleistung 802.11b: 16 dBm ±2 dBm (11 Mbps); 802.11g: 16 dBm ±2 dBm (54 Mbps); 802.11n @2.4 GHz: 16 dBm ±2 dBm (HT20 MCS7); 802.11n @2.4 GHz: 16 dBm ±2 dBm (HT40 MCS7)Wi-Fi Performance Test Test conditions: AP: IR305LQ20-WLAN / STA: Xiaomi 10S, WPA2-PSK AES, Channel 11, 40MHzArbeitsmodus AP / Client / WDS
-
Device Power
Betriebsleistung 150~320 mA@12VSpitzenleistung 320 mA@12VStandby-Leistung 120~200 mA@12V
-
Mechanische Spezifikationen
Enclosure and Cooling Metal shell, fanless coolingMontageart DIN railProduct Dimensions (W × D × H) 127 × 108.2 × 35 mm (5 × 4.26 × 1.38 in)Produktgewicht 454 g (1 lb)Schutzklasse IP30
-
Umwelt und Zertifizierungen
Umgebungsfeuchtigkeit 5~95% (non-condensing)Zertifizierungen CE, E-MARK, FCC, IC, PTCRB, AT&T, Verizon, T-Mobile, RCM, IMDA, MIC&JATE, SRRC, UL, C1D2, IEC 62443-4-2, EN18031EMC Indicators EN61000-4-2, level 3, ESD EN61000-4-3, level 3, Radiated Electric Field EN61000-4-4, level 3, Burst Electric Field EN61000-4-5, level 3, Surge EN61000-4-6, level 3, Conducted Disturbance Immunity EN61000-4-8, >level 2, Power Frequency Magnetic Field Immunity, horizontal/vertical 400A/m EN61000-4-12, level 3, Oscillatory Wave ImmunityBetriebstemperatur Standard: -35 °C ~ 70 °C (-31 °F ~ 158 °F) Extended: -40 °C ~ 75 °C (-40 °F ~ 167 °F)Physikalische Eigenschaften Shock IEC60068-2-27 Vibration IEC60068-2-6 Drop IEC60068-2-32Lagertemperatur -40 °C ~ 85 °C (-40 °F ~ 185 °F)
-
Mobilfunknetz
Zugriffsauthentifizierung CHAP/PAPConnection Mode Always online, on-demand dialing, manual dialingDialing Mode PPP, QMI, ECM (depending on model)Dual-SIM-Umschaltung Supports SIM switching policies triggered by signal threshold, packet loss threshold, dial failure count, etc.Netzwerkzugriff APN, VPDNNetzwerkstandard GSM/GPRS/EDGE, UMTS/HSPA+/EVDO/TD-SCDMA, TDD LTE/FDD LTE, 5G NR (SA/NSA)Operator Configuration Built-in global mainstream operator APN configurations, supports T-Mobile, AT&T, Verizon, etc.PDP Configuration Supports IPv4/IPv4V6Signal Reporting Supports RSRP, RSRQ, SINR, RSSI, RSCP, Ec/Io, PCI, BAND and other parameter reportingSIM-Karte Dual Nano-SIM, drawer-type slot
-
Wired Network
Ethernet-Anschlüsse 5 × 10/100 Mbps RJ45Gratuitous ARP Supports GARP broadcast, configurable broadcast count (1-10) and timeout (1-60 seconds)IP Passthrough Supports IP Passthrough function, distributing WAN port address to LAN port devicesIsolation Protection 1.5KV network isolation transformer protectionPort Roles Supports flexible WAN/LAN/VLAN configurationVLAN Supports Access/Trunk mode, VLAN IP address pool configurationWAN-Protokoll Statische IP, DHCP, PPPoE
-
Wi-Fi Network
Antennenschnittstelle RP-SMA ×2Authentication Mode Open, WEP, WPA-PSK, WPA2-PSK, WPA/WPA2, etc.Bandwidth 20 MHz / 40 MHzEncryption Mode NONE, WEP, TKIP, AESMaximum Rate 300 Mbit/sProtocol Standard IEEE 802.11 b/g/nRadiofrequenz 2,4 GHzSicherheitsmerkmale Wi-Fi password encrypted display, Wi-Fi user isolation, AP black/whitelistSendeleistung 16 dBm ±2 dBmArbeitsmodus AP / Client / WDS
-
Link Backup and Redundancy
ICMP Detection Supports detection server, interval, timeout, maximum retry count configurationLink-Backup Supports cellular/WAN mutual backup, hot backup/cold backup/load balancing three modesLoad Balancing After ICMP detection succeeds, data is transmitted through the corresponding linkVRRP Virtual Router Redundancy Protocol, supports virtual MAC, priority election
-
Routing Capability
Dynamic Domain Name DDNS, supports HTTPS updateNAT Network Address Translation, supports port mapping, virtual IP mappingOSPF Open Shortest Path First dynamic routing protocol, supports router ID and network advertisementStatic Routing Supports destination network, subnet mask, gateway, interface configuration, supports priority
-
VPN and Data Security
Certificate Management Supports CA certificate, PKCS12 certificate import/exportDMVPN Dynamic Multipoint VPNGRE Generic Routing Encapsulation tunnelIPsec-VPN Supports IKEv1/IKEv2, AES256-SHA512 encryption algorithm, up to 10 tunnels, supports peer domain name configurationL2TP Supports L2TP over IPsec, supports NAT traversalOpenVPN Supports TAP/TUN mode, TLS-auth/tls-crypt options, AES-256-GCM/SHA256 encryptionPPTP Supports client/server modeWireGuard New-generation high-performance VPN protocol, supports connection status detectionZeroTier Supports virtual LAN networking, multiple tunnels configurable
-
Firewall and Access Control
802.1x Port-level access authenticationACL Access Control List, supports source/destination address, port, protocol configurationContent Filtering Supports domain filtering, domain auto-refresh mechanismDevice Access Control Supports interface, protocol, source address, port configurationDMZ DMZ host configurationDoS Protection Denial of Service attack protectionIP-MAC Binding Static binding of IP and MAC addressMAC Address Filtering Supports black/whitelist modeNAT Supports source address, destination address, port, interface configurationPort Mapping Supports protocol, source address, service port, internal port, external interface configurationSPI Firewall Stateful packet inspectionVirtual IP Mapping Supports source address range configuration
-
Device Management and O&M
Konfigurationsverwaltung Supports configuration import/export, factory resetKonsole Local serial console managementGeräte-Manager InHand device cloud platform, supports batch management, remote configuration, firmware upgradeFirmware Signature System firmware adds signature verification to prevent firmware tamperingHTTP API Supports HTTP/HTTPS API, remote query and configurationInConnect Supports device remote access and NAT rule issuanceSNMP SNMP v1/v2c/v3, supports custom communication portSNMP TRAP Alarm information active reportingSSH/Telnet Remote command line managementSystem-Upgrade Supports Web upgrade and Device Manager remote upgrade
-
Logs and Alarms
Remote Log Supports Syslog server (UDP 514 port)SMS Alarm Supports SMS query and configuration of APN/SIM/operator, remote status query and restartStatus Reporting Supports system, Modem, network connection, routing status, GPIO pin status reportingSystem Alarm System restart, LAN up/down, SIM failure, signal quality abnormal alarmSystem Log Local/remote/serial log output, supports user-defined remote log prefixTraffic Alarm Monthly/24-hour/hourly traffic threshold alarm, traffic overrun reporting to cloud platform
-
Industrial Protocols and Interfaces
DTU TCP/UDP transparent transmission, DCTCP/DCUDP mode, supports domain name configurationI/O Control 4 × IO (DI/DO configurable), supports edge-triggered status reportingModbus-Brücke Modbus RTU zu Modbus TCPSerial Port Traffic Statistics Supports RS-232/RS-485 serial port traffic statistics, TCP connection status displaySMART-EMS Supports cellular IP address reporting, optional no restart when connection failsState Grid Encryption Supports IEC101/IEC104 power protocol encryption (specific models)
-
Network Services
DDNS Supports HTTPS updateDHCP Server/Client, supports static binding (up to 200 entries), address pool range automatic verificationDNS DNS proxy, DNS forwarding, supports custom domain name serverWartungswerkzeuge Ping, traceroute, speed test, ARPINGNetwork Packet Capture Built-in TCPDUMP packet capture tool, supports interface, capture count, expert options configurationNTP NTP server function, GPS time synchronizationPortal Captive portal authenticationQoS Bandwidth limiting, IP rate limitingScheduled Tasks Scheduled restart, supports advanced options to configure multiple rulesSIP ALG SIP Application Layer Gateway
Standardpaket*
- Industrierouter IR315 *1
- 4G-Antenne *2
- WLAN-Antenne *2
- GNSS-Antenne *1
- Ethernet-Kabel *1
- Netzteil *1
- DIN-Schienen-Montagesatz *1
Bitte beachten Sie, dass die 4G/5G/GNSS-Antennen je nach gewähltem Modell im Lieferumfang enthalten sind.
Optionales Zubehör
- Netzteil *1
- Panel-Montagesatz *1
Kontaktieren Sie uns Um mehr über unsere Verpackungsoptionen zu erfahren, wenden Sie sich bitte direkt an uns.
Spezifikationen
-
Wichtigste technische Spezifikationen
Mobilfunknetz 5G NR (SA/NSA) or LTE (depending on model); dual Nano-SIM; supports PDP configuration (IPv4/IPv4V6)Cloud Management and Network Management Device Manager/ICS platform; SNMP v1/v2c/v3 (supports custom communication port), SNMP TRAPDimensions and Weight 127 × 108.2 × 35 mm (5 × 4.26 × 1.38 in); 454 g (1 lb)Dynamic Routing and High Availability Static/OSPF routing; VRRP (supports virtual MAC), link online detection, dual-SIM switching, SIM switching policy, embedded watchdogEthernet-Schnittstelle 5 × 10/100 Mbps RJ45, supports WAN/LAN/VLAN, 1.5KV network isolation transformer protectionFirewall and Access Control SPI stateful inspection, DoS protection, ACL, content filtering (domain auto-refresh), 802.1x, IP-MAC binding, MAC address filtering, etc.Betriebstemperatur Standard: -35 °C ~ 70 °C (-31 °F ~ 158 °F); Extended: -40 °C ~ 75 °C (-40 °F ~ 167 °F)Stromversorgung DC 9~36 V, overcurrent/reverse polarity protection, 2-pin industrial terminalSchutzklasse IP30Serial Port and IO (optional) 1×RS-232+1×RS-485 or 4×IO (depending on model)VPN IPsec (IKEv2, AES256-SHA512), PPTP, L2TP, GRE, DMVPN, OpenVPN, WireGuard, ZeroTierWi-Fi (optional) 2.4 GHz, IEEE 802.11 b/g/n, up to 300 Mbps
-
Product Innovation Summary
5G / RedCap Support Supports NRQ2, NRR0, NRR2 and other 5G modules, as well as NRF2/NRF4 and other RedCap modulesCloud Platform Management Multi-Cloud Platform AdaptationCompliance Adaptation Supports U.S. TAA Act requirements, automatic replacement of logo/domain/SSID/alarm pageConfiguration Integrity Configuration import/export verification, supports configuration files up to 128KBDDNS Enhancement Supports HTTPS DDNS updateDual-SIM Intelligent Switching Supports automatic SIM switching based on signal quality, ICMP detection, packet loss rate, dial failure count, and other strategiesEnhanced Tunnel Management Supports peer domain name, multiple remote subnets, independent start/stop control of single tunnelEnterprise Access Radius authentication, Wi-Fi user isolation, password show/hide, calibration data backupGlobal Operator Adaptation Automatically matches APN, BAND, IMS configurations for operators such as Verizon / AT&T / T-MobileGlobalization and OEM Multi-OEM CustomizationI/O Edge Control 4-channel digital I/O, relay output, I/O status reporting to cloud platform, alarm triggeringIndustrial IoT Protocols Industrial Serial Port / DTUIndustrial Reliability High Availability DesignLink Reliability Link Backup and Hot BackupLoad Balancing Multi-link load balancing optimization, improving bandwidth utilization and business continuityModern VPN Protocols Added WireGuard, ZeroTier to meet flexible networking needsMulti-Mode Cellular Communication Intelligent Dialing Mode AdaptationNetwork Diagnosis and Observation Built-in TCPDUMP, ping, traceroute, Qlog; cellular signal / GNSS parameter reportingNetzwerkmanagement Flexible Layer 2/Layer 3Network Security Access ZugangskontrolleO&M and Deployment FCT Factory TestO&M Command Enhancement Factory mode supports nvram / show / info version / net test / factory resetPermission and Encryption User permission management, HTTPS API, Wi-Fi password encryption, SSH login bannerSecure Registration and Authentication Supports MQTT/MQTTS, JWT registration, public/private key authentication, remote firmware upgradeSecurity Hardening Firmware SecuritySoftware Component Upgrade Continuous updates of OpenSSL, OpenVPN, curl, tcpdump, dnsmasq, mosquitto, busybox, etc.State Grid Encryption Supports IEC101/IEC104/DC protocol state cryptography encryption, model 305NRQ2-SECVPN Technology Matrix Full-Protocol VPN SupportVulnerability Repair Continuously fixes CVE, Talos, Fortinet, CISA and other disclosed vulnerabilitiesWLAN Capability Multi-Mode Wi-Fi
-
CPU und Speicher
CPU 580 MHzBlitz 64 MB SPIRAM 128 MB DDR2
-
Konnektivität und Schnittstellen
Antennenanschlüsse 5G: SMA ×2; 4G: SMA ×1 (overseas 4G models are SMA ×2); Wi-Fi: RP-SMA ×2Ethernet-Anschlüsse 5 × 10/100 Mbps RJ45, supports WAN/LAN/VLAN, 1.5KV network isolation transformer protectionGNSS (optional) Some models support (see ordering information )Grounding Terminal UnterstütztI/O Port (optional) 4 × IO (DI/DO configurable)LED-Anzeigen Power, System, Network, Wi-Fi, SignalStromschnittstelle DC 9~36V, overcurrent/reverse polarity protection, 2-pin industrial terminalReset-Taste Reset-Taste mit LochblendeSerial Port (optional) 1 × RS-232 + 1 × RS-485SIM-Kartensteckplatz Drawer-type slot ×1, supports 2 × Nano-SIM
-
W-lan
10m Suction cup antenna: 90.96 Mbps (signal -54 dBm); Rod antenna: 90.74 Mbps (signal -45 dBm)1m Suction cup antenna: 91.26 Mbps (signal -36 dBm); Rod antenna: 90.22 Mbps (signal -25 dBm)30m Suction cup antenna: 1.28 Mbps (signal -62 dBm); Rod antenna: 7.20 Mbps (signal -64 dBm)5m Suction cup antenna: 90.25 Mbps (signal -47 dBm); Rod antenna: 90.30 Mbps (signal -38 dBm)Maximum Transmission Rate 300 Mbit/sProtokoll IEEE 802.11 b/g/nRadiofrequenz 2,4 GHzÜbertragungsdistanz Approx. 50 meters line-of-sight (affected by site environment)Sendeleistung 802.11b: 16 dBm ±2 dBm (11 Mbps); 802.11g: 16 dBm ±2 dBm (54 Mbps); 802.11n @2.4 GHz: 16 dBm ±2 dBm (HT20 MCS7); 802.11n @2.4 GHz: 16 dBm ±2 dBm (HT40 MCS7)Wi-Fi Performance Test Test conditions: AP: IR305LQ20-WLAN / STA: Xiaomi 10S, WPA2-PSK AES, Channel 11, 40MHzArbeitsmodus AP / Client / WDS
-
Device Power
Betriebsleistung 150~320 mA@12VSpitzenleistung 320 mA@12VStandby-Leistung 120~200 mA@12V
-
Mechanische Spezifikationen
Enclosure and Cooling Metal shell, fanless coolingMontageart DIN railProduct Dimensions (W × D × H) 127 × 108.2 × 35 mm (5 × 4.26 × 1.38 in)Produktgewicht 454 g (1 lb)Schutzklasse IP30
-
Umwelt und Zertifizierungen
Umgebungsfeuchtigkeit 5~95% (non-condensing)Zertifizierungen CE, E-MARK, FCC, IC, PTCRB, AT&T, Verizon, T-Mobile, RCM, IMDA, MIC&JATE, SRRC, UL, C1D2, IEC 62443-4-2, EN18031EMC Indicators EN61000-4-2, level 3, ESD EN61000-4-3, level 3, Radiated Electric Field EN61000-4-4, level 3, Burst Electric Field EN61000-4-5, level 3, Surge EN61000-4-6, level 3, Conducted Disturbance Immunity EN61000-4-8, >level 2, Power Frequency Magnetic Field Immunity, horizontal/vertical 400A/m EN61000-4-12, level 3, Oscillatory Wave ImmunityBetriebstemperatur Standard: -35 °C ~ 70 °C (-31 °F ~ 158 °F) Extended: -40 °C ~ 75 °C (-40 °F ~ 167 °F)Physikalische Eigenschaften Shock IEC60068-2-27 Vibration IEC60068-2-6 Drop IEC60068-2-32Lagertemperatur -40 °C ~ 85 °C (-40 °F ~ 185 °F)
-
Mobilfunknetz
Zugriffsauthentifizierung CHAP/PAPConnection Mode Always online, on-demand dialing, manual dialingDialing Mode PPP, QMI, ECM (depending on model)Dual-SIM-Umschaltung Supports SIM switching policies triggered by signal threshold, packet loss threshold, dial failure count, etc.Netzwerkzugriff APN, VPDNNetzwerkstandard GSM/GPRS/EDGE, UMTS/HSPA+/EVDO/TD-SCDMA, TDD LTE/FDD LTE, 5G NR (SA/NSA)Operator Configuration Built-in global mainstream operator APN configurations, supports T-Mobile, AT&T, Verizon, etc.PDP Configuration Supports IPv4/IPv4V6Signal Reporting Supports RSRP, RSRQ, SINR, RSSI, RSCP, Ec/Io, PCI, BAND and other parameter reportingSIM-Karte Dual Nano-SIM, drawer-type slot
-
Wired Network
Ethernet-Anschlüsse 5 × 10/100 Mbps RJ45Gratuitous ARP Supports GARP broadcast, configurable broadcast count (1-10) and timeout (1-60 seconds)IP Passthrough Supports IP Passthrough function, distributing WAN port address to LAN port devicesIsolation Protection 1.5KV network isolation transformer protectionPort Roles Supports flexible WAN/LAN/VLAN configurationVLAN Supports Access/Trunk mode, VLAN IP address pool configurationWAN-Protokoll Statische IP, DHCP, PPPoE
-
Wi-Fi Network
Antennenschnittstelle RP-SMA ×2Authentication Mode Open, WEP, WPA-PSK, WPA2-PSK, WPA/WPA2, etc.Bandwidth 20 MHz / 40 MHzEncryption Mode NONE, WEP, TKIP, AESMaximum Rate 300 Mbit/sProtocol Standard IEEE 802.11 b/g/nRadiofrequenz 2,4 GHzSicherheitsmerkmale Wi-Fi password encrypted display, Wi-Fi user isolation, AP black/whitelistSendeleistung 16 dBm ±2 dBmArbeitsmodus AP / Client / WDS
-
Link Backup and Redundancy
ICMP Detection Supports detection server, interval, timeout, maximum retry count configurationLink-Backup Supports cellular/WAN mutual backup, hot backup/cold backup/load balancing three modesLoad Balancing After ICMP detection succeeds, data is transmitted through the corresponding linkVRRP Virtual Router Redundancy Protocol, supports virtual MAC, priority election
-
Routing Capability
Dynamic Domain Name DDNS, supports HTTPS updateNAT Network Address Translation, supports port mapping, virtual IP mappingOSPF Open Shortest Path First dynamic routing protocol, supports router ID and network advertisementStatic Routing Supports destination network, subnet mask, gateway, interface configuration, supports priority
-
VPN and Data Security
Certificate Management Supports CA certificate, PKCS12 certificate import/exportDMVPN Dynamic Multipoint VPNGRE Generic Routing Encapsulation tunnelIPsec-VPN Supports IKEv1/IKEv2, AES256-SHA512 encryption algorithm, up to 10 tunnels, supports peer domain name configurationL2TP Supports L2TP over IPsec, supports NAT traversalOpenVPN Supports TAP/TUN mode, TLS-auth/tls-crypt options, AES-256-GCM/SHA256 encryptionPPTP Supports client/server modeWireGuard New-generation high-performance VPN protocol, supports connection status detectionZeroTier Supports virtual LAN networking, multiple tunnels configurable
-
Firewall and Access Control
802.1x Port-level access authenticationACL Access Control List, supports source/destination address, port, protocol configurationContent Filtering Supports domain filtering, domain auto-refresh mechanismDevice Access Control Supports interface, protocol, source address, port configurationDMZ DMZ host configurationDoS Protection Denial of Service attack protectionIP-MAC Binding Static binding of IP and MAC addressMAC Address Filtering Supports black/whitelist modeNAT Supports source address, destination address, port, interface configurationPort Mapping Supports protocol, source address, service port, internal port, external interface configurationSPI Firewall Stateful packet inspectionVirtual IP Mapping Supports source address range configuration
-
Device Management and O&M
Konfigurationsverwaltung Supports configuration import/export, factory resetKonsole Local serial console managementGeräte-Manager InHand device cloud platform, supports batch management, remote configuration, firmware upgradeFirmware Signature System firmware adds signature verification to prevent firmware tamperingHTTP API Supports HTTP/HTTPS API, remote query and configurationInConnect Supports device remote access and NAT rule issuanceSNMP SNMP v1/v2c/v3, supports custom communication portSNMP TRAP Alarm information active reportingSSH/Telnet Remote command line managementSystem-Upgrade Supports Web upgrade and Device Manager remote upgrade
-
Logs and Alarms
Remote Log Supports Syslog server (UDP 514 port)SMS Alarm Supports SMS query and configuration of APN/SIM/operator, remote status query and restartStatus Reporting Supports system, Modem, network connection, routing status, GPIO pin status reportingSystem Alarm System restart, LAN up/down, SIM failure, signal quality abnormal alarmSystem Log Local/remote/serial log output, supports user-defined remote log prefixTraffic Alarm Monthly/24-hour/hourly traffic threshold alarm, traffic overrun reporting to cloud platform
-
Industrial Protocols and Interfaces
DTU TCP/UDP transparent transmission, DCTCP/DCUDP mode, supports domain name configurationI/O Control 4 × IO (DI/DO configurable), supports edge-triggered status reportingModbus-Brücke Modbus RTU zu Modbus TCPSerial Port Traffic Statistics Supports RS-232/RS-485 serial port traffic statistics, TCP connection status displaySMART-EMS Supports cellular IP address reporting, optional no restart when connection failsState Grid Encryption Supports IEC101/IEC104 power protocol encryption (specific models)
-
Network Services
DDNS Supports HTTPS updateDHCP Server/Client, supports static binding (up to 200 entries), address pool range automatic verificationDNS DNS proxy, DNS forwarding, supports custom domain name serverWartungswerkzeuge Ping, traceroute, speed test, ARPINGNetwork Packet Capture Built-in TCPDUMP packet capture tool, supports interface, capture count, expert options configurationNTP NTP server function, GPS time synchronizationPortal Captive portal authenticationQoS Bandwidth limiting, IP rate limitingScheduled Tasks Scheduled restart, supports advanced options to configure multiple rulesSIP ALG SIP Application Layer Gateway
Downloads
Bestellung
Standardpaket*
- Industrierouter IR315 *1
- 4G-Antenne *2
- WLAN-Antenne *2
- GNSS-Antenne *1
- Ethernet-Kabel *1
- Netzteil *1
- DIN-Schienen-Montagesatz *1
Bitte beachten Sie, dass die 4G/5G/GNSS-Antennen je nach gewähltem Modell im Lieferumfang enthalten sind.
Optionales Zubehör
- Netzteil *1
- Panel-Montagesatz *1
Kontaktieren Sie uns Um mehr über unsere Verpackungsoptionen zu erfahren, wenden Sie sich bitte direkt an uns.
Geräte-Manager
Geräteverwaltungs-Cloud
Zentralisierte Verwaltung von InHand Industrieroutern und Gateways mit visueller Überwachung sowie einfacher Fernkonfiguration und -aktualisierung.
Geräte-Manager
InConnect
Fernzugriffsdienst
Sicherer Fernzugriff auf Geräte per Plug-and-Play, der es Technikern ermöglicht, Fernwartung, Software-Updates und Protokolldiagnosen durchzuführen.
InConnect
Ähnliche Fälle
Fernüberwachungslösung für ETC-Geräte
Fernüberwachungslösung für ETC-Geräte – Anwendungen und Anwendungsfälle: Wichtigste Erkenntnisse…
Mehr erfahren →
Intelligente Betonmischanlagenlösung
Intelligente Betonmischanlagen – Anwendungsbeispiele und Schlüsselerkenntnisse: Die IR315…
Mehr erfahren →Häufig gestellte Fragen
Mit welchen optionalen Funktionen kann der IR315 konfiguriert werden?
Der IR315 unterstützt vier optionale Hardwarefunktionen, die bei der Bestellung ausgewählt werden:
- W-lan (
-WLAN(Suffix): 802.11b/g/n, 300 Mbit/s, AP- und STA-Modus - Seriennummer (
-SSuffix): 1× RS232 + 1× RS485 — sich gegenseitig ausschließend mit I/O - E/A (Standard, ohne Suffix): 4× konfigurierbare digitale Ein-/Ausgänge
- GNSS (
-G(Suffix): GPS, GLONASS, BeiDou, Galileo und QZSS mit einer Genauigkeit von ±2,5 m
Vorlage für die Teilenummer: IR315-- - Bitte prüfen Sie vor der Bestellung, ob die Konfiguration zu Ihrer Anwendung passt.[-G]
Wie richte ich das IR315 ein und melde mich zum ersten Mal an?
Installieren Sie die Antennen (Mobilfunk, WLAN, GNSS, falls zutreffend), legen Sie die SIM-Karte bei ausgeschaltetem Gerät ein und schließen Sie das Netzteil an. Sobald das Gerät hochgefahren ist, verbinden Sie einen Computer per Ethernet-Kabel mit einem LAN-Anschluss. Stellen Sie den Adapter auf DHCP oder eine statische IP-Adresse im Bereich 192.168.2.x ein. Öffnen Sie einen Browser und gehen Sie zu http://192.168.2.1 Melden Sie sich mit den auf dem Geräteetikett aufgedruckten Zugangsdaten an.
Wie verbinde ich den IR315 mit dem Mobilfunknetz und richte den APN ein?
Schalten Sie das Gerät aus und legen Sie die SIM-Karte ein. Schalten Sie das Gerät ein – das IR315 erkennt den Mobilfunkanbieter in den meisten Fällen automatisch und wendet den passenden APN an, sodass keine manuelle Einrichtung erforderlich ist. Falls die Mobilfunkverbindung nicht hergestellt wird, melden Sie sich an und gehen Sie zu Netzwerk > MobilfunkKonfigurieren Sie den APN gemäß den Anforderungen Ihres Mobilfunkanbieters und klicken Sie auf AnwendenÜberprüfen Sie dies, indem Sie Folgendes prüfen: NET LEDDauerhaft grün = Netzwerk verbunden; blinkend grün = Netzwerkverbindung wird hergestellt; aus = Netzwerk getrennt.
Wie konfiguriere ich Link-Backup (WAN primär, Mobilfunk-Failover) auf dem IR315?
Stellen Sie sicher, dass sowohl die WAN-Verbindung als auch die Mobilfunkverbindung konfiguriert sind und funktionieren. Gehen Sie zu Netzwerk > Link-BackupStellen Sie die ein Hauptlink zum WAN und dem Backup-Link Auf Mobilfunk. Wählen Sie Hot Backup (Mobilfunk bleibt im Standby-Modus) oder Kalt-Backup (Mobilfunk wird erst nach Ausfall der WAN-Verbindung aktiviert). Stellen Sie ein ICMP-Erkennungsserver Um die WAN-Verfügbarkeit zu ermitteln. Klicken Sie hier. Anwenden.
—

