IR602
5G RedCap Industrial Router
IR602 brings 5G RedCap, Wi-Fi 6, and secure connectivity to distributed industrial sites. Dual-SIM failover and DeviceLive simplify remote management.
IR302
Router industrial
El IR302 es un router industrial compacto y versátil que proporciona conectividad estable, segura y conforme a las normativas para emplazamientos no atendidos, así como una red eficiente en aplicaciones de IoT industriales y comerciales.
FOTO
Lightweight 5G RedCap Connectivity for Industrial IoT at Scale
5G RedCap for Industrial IoT
5G NR SA provides cellular backhaul for large-scale, mid-speed industrial IoT deployments, with 4G LTE support.
Wi-Fi 6 and 2.5GbE Local Access
Dual-band Wi-Fi 6, one 2.5GbE port, and one GbE port connect wired and wireless field devices.
Resilient Multi-WAN Connectivity
Dual-SIM failover, multi-WAN backup, link checks, and a hardware watchdog improve connection resilience.
Secure Remote Networking
A stateful firewall, access controls, and multiple VPN protocols protect data between field sites and remote systems.
Cloud Management with DeviceLive
DeviceLive supports remote monitoring, batch configuration, diagnostics, updates, and alerts across distributed routers.
Fanless Industrial Design
The IP30 fanless metal enclosure, industrial EMC protection, and -40°C to +70°C operating range suit control cabinets and protected field enclosures.
-
Hardware Overview
Procesador Cortex-A53 dual-core @ 1.3 GHzMemoria 512 MB DDR3Almacenamiento 128 MB SPI NAND FlashWi-Fi IEEE 802.11 ax/ac/a/b/g/n, Wi-Fi 6, 2.4 GHz + 5 GHz, 3000 MbpsSeguridad Wi-Fi WPA3-Enterprise, WPA2-Enterprise, WEP/TKIP/AES encryptionWi-Fi Max Power 5 GHz: 20 dBm, 2.4 GHz: 20 dBmCellular Standards 5G NR SA; 4G LTE FDD/TDDRanuras para tarjeta SIM 2 × Nano-SIM (4FF), eSIM reservedPuertos Ethernet 1 × 2.5GbE RJ45 (WAN/LAN switchable) + 1 × GbE RJ45Ethernet Isolation 1.5 kV network transformer isolationE/S industriales 2 × GPIO, 4-pin industrial terminal blockDI Characteristics Input 0-30 V, logic high ≥10 V, logic low ≤3 VDO Characteristics Wet contact, open-drain output 1 mA; output low 0 V, high 13 V (pull-up resistor, no drive capability)Conectores de antena 4 × SMA external antennas: 2 × cellular + 2 × Wi-FiIndicadores LED 1 × SYS, 1 × NET, 3 × Signal (red/yellow/green), 1 × Wi-Fi 2.4G, 1 × Wi-Fi 5GBotón de reinicio 1 × Reset pinholeEntrada de alimentación DC 12 V / 2 A, 4-pin industrial terminal blockConsumo de energía ≤ 15 WEnfriamiento Fanless passive coolingRecinto All-metal SGCC galvanized steel, black fine-texture coatingProtección contra la entrada de agua IP30Temperatura de funcionamiento -40 °C to +70 °C (-40 °F to +158 °F), extended to +75 °C (+167 °F)Temperatura de almacenamiento -40 °C to +85 °C (-40 °F to +185 °F)Humedad 5% to 95% (non-condensing)Dimensiones 98.3 × 92 × 24 mm (3.87 × 3.62 × 0.94 in)Peso Approx. 390 g (0.86 lb)Montaje DIN rail / wall-mount
-
Cortafuegos
Stateful Inspection Connection-state-based packet inspectionInbound/Outbound Rules Granular inbound and outbound access controlReenvío de puertos Port mapping and intranet penetrationNAT SNAT / DNATMAC Filtering Blacklist / whitelist modeDomain Filtering Domain-based access controlPolicy Routing Intelligent traffic distribution based on source/destination addressesTraffic Shaping (QoS) Interface-level bandwidth limiting and queue management
-
VPN Support
IPsec IKEv1 / IKEv2L2TP Client / ServerWireGuard Client / ServerOpenVPN Client / Server
-
DeviceLive Cloud Management
Monitoreo en tiempo real Visualized real-time device status, signal strength, data usageDiagnóstico remoto Remote troubleshooting without on-site accessBatch Management Configure multiple devices simultaneouslyMantenimiento remoto Reduce on-site visits through remote configuration and troubleshootingOTA Updates Over-the-air firmware and configuration updatesAlarm Management Device anomaly alerts and notificationsAnálisis de señales Cellular signal quality monitoring and evaluation
-
Mechanical Reliability
Choque IEC 60068-2-27Vibración IEC 60068-2-6Caída libre IEC 60068-2-32
-
EMC Immunity
ESD (Electrostatic Discharge) EN 61000-4-2, Level 3Radiated Susceptibility (RS) EN 61000-4-3, Level 3EFT (Electrical Fast Transient) EN 61000-4-4, Level 3Aumento EN 61000-4-5, Level 3Conducted Susceptibility (CS) EN 61000-4-6, Level 3Power Frequency Magnetic Field (PFMF) EN 61000-4-8, Level 3
Paquete estándar*
- IR602 Industrial Router ×1
- 5G Antenna ×2
- Wi‑Fi Antenna ×2
- Ethernet Cable ×1
- Power Adapter ×1
- Panel‑mount Kit ×1
* El contenido del paquete estándar varía según los códigos de pedido estándar.
Accesorios opcionales
- Kit de montaje en riel DIN *1
Contáctanos Para obtener más información sobre nuestras opciones de embalaje, contáctenos directamente.
Presupuesto
-
Hardware Overview
Procesador Cortex-A53 dual-core @ 1.3 GHzMemoria 512 MB DDR3Almacenamiento 128 MB SPI NAND FlashWi-Fi IEEE 802.11 ax/ac/a/b/g/n, Wi-Fi 6, 2.4 GHz + 5 GHz, 3000 MbpsSeguridad Wi-Fi WPA3-Enterprise, WPA2-Enterprise, WEP/TKIP/AES encryptionWi-Fi Max Power 5 GHz: 20 dBm, 2.4 GHz: 20 dBmCellular Standards 5G NR SA; 4G LTE FDD/TDDRanuras para tarjeta SIM 2 × Nano-SIM (4FF), eSIM reservedPuertos Ethernet 1 × 2.5GbE RJ45 (WAN/LAN switchable) + 1 × GbE RJ45Ethernet Isolation 1.5 kV network transformer isolationE/S industriales 2 × GPIO, 4-pin industrial terminal blockDI Characteristics Input 0-30 V, logic high ≥10 V, logic low ≤3 VDO Characteristics Wet contact, open-drain output 1 mA; output low 0 V, high 13 V (pull-up resistor, no drive capability)Conectores de antena 4 × SMA external antennas: 2 × cellular + 2 × Wi-FiIndicadores LED 1 × SYS, 1 × NET, 3 × Signal (red/yellow/green), 1 × Wi-Fi 2.4G, 1 × Wi-Fi 5GBotón de reinicio 1 × Reset pinholeEntrada de alimentación DC 12 V / 2 A, 4-pin industrial terminal blockConsumo de energía ≤ 15 WEnfriamiento Fanless passive coolingRecinto All-metal SGCC galvanized steel, black fine-texture coatingProtección contra la entrada de agua IP30Temperatura de funcionamiento -40 °C to +70 °C (-40 °F to +158 °F), extended to +75 °C (+167 °F)Temperatura de almacenamiento -40 °C to +85 °C (-40 °F to +185 °F)Humedad 5% to 95% (non-condensing)Dimensiones 98.3 × 92 × 24 mm (3.87 × 3.62 × 0.94 in)Peso Approx. 390 g (0.86 lb)Montaje DIN rail / wall-mount
-
Cortafuegos
Stateful Inspection Connection-state-based packet inspectionInbound/Outbound Rules Granular inbound and outbound access controlReenvío de puertos Port mapping and intranet penetrationNAT SNAT / DNATMAC Filtering Blacklist / whitelist modeDomain Filtering Domain-based access controlPolicy Routing Intelligent traffic distribution based on source/destination addressesTraffic Shaping (QoS) Interface-level bandwidth limiting and queue management
-
VPN Support
IPsec IKEv1 / IKEv2L2TP Client / ServerWireGuard Client / ServerOpenVPN Client / Server
-
DeviceLive Cloud Management
Monitoreo en tiempo real Visualized real-time device status, signal strength, data usageDiagnóstico remoto Remote troubleshooting without on-site accessBatch Management Configure multiple devices simultaneouslyMantenimiento remoto Reduce on-site visits through remote configuration and troubleshootingOTA Updates Over-the-air firmware and configuration updatesAlarm Management Device anomaly alerts and notificationsAnálisis de señales Cellular signal quality monitoring and evaluation
-
Mechanical Reliability
Choque IEC 60068-2-27Vibración IEC 60068-2-6Caída libre IEC 60068-2-32
-
EMC Immunity
ESD (Electrostatic Discharge) EN 61000-4-2, Level 3Radiated Susceptibility (RS) EN 61000-4-3, Level 3EFT (Electrical Fast Transient) EN 61000-4-4, Level 3Aumento EN 61000-4-5, Level 3Conducted Susceptibility (CS) EN 61000-4-6, Level 3Power Frequency Magnetic Field (PFMF) EN 61000-4-8, Level 3
Descargas
Pedidos
Paquete estándar*
- Router industrial IR302 *1
- Fuente de alimentación *1
- Antena 4G *1 (Norteamérica *2)
- Antena Wi-Fi *2
- Cable Ethernet *1
- Kit de montaje en panel *1
* El contenido del paquete estándar varía según los códigos de pedido estándar.
Accesorios opcionales
- Kit de montaje en riel DIN *1
Contáctanos Para obtener más información sobre nuestras opciones de embalaje, contáctenos directamente.
DeviceLive
Plataforma de gestión de dispositivos IoT
Gestión de dispositivos, monitorización remota, gestión de aplicaciones perimetrales y mantenimiento remoto para ayudar a las empresas industriales a construir redes perimetrales inteligentes.
DeviceLive
Casos relacionados
Solar-Powered 5G RedCap Connectivity for Municipal Video Surveillance
Many municipal surveillance sites lie beyond the reach of grid power and…
Más información →
5G RedCap connectivity for smart manufacturing
As factories connect more PLCs, robots, AGVs, and cameras, production networks must…
Más información →Preguntas frecuentes
What is the IR602, and what problem is it designed to solve?
The IR602 is a lightweight 5G RedCap industrial router that combines 5G RedCap, 4G fallback, Wi-Fi 6, 2.5GbE, a second wired LAN, industrial GPIO, VPN, and DeviceLive cloud management in a compact metal enclosure. It targets large fleets of moderate-rate industrial endpoints that need remote operations and link redundancy.
Which application scenarios are identified for the IR602?
The datasheet lists PLCs, AGVs, production lines, and video in smart manufacturing; FTU/RTU, distributed PV, oil fields, and pipelines in energy; surveillance, EV chargers, displays, and lighting in smart cities; transportation infrastructure; environmental and chemical safety monitoring; and temporary emergency communications.
What does 5G RedCap mean for an IR602 deployment?
RedCap addresses industrial devices that need more bandwidth than traditional low-power wide-area links but do not require full eMBB peak capability. The IR602 uses it for PLC, AGV, telemetry, supporting video, and distributed-site traffic, with 4G LTE fallback.
Availability depends on the target carrier enabling RedCap on the required bands and area. Confirm coverage, SIM plan, core-network support, and allowed service rate before rollout.
What processor, memory, and storage does the IR602 use?
The IR602 uses a dual-core Cortex-A53 processor at 1.3 GHz, 512 MB DDR3 memory, and 128 MB SPI NAND Flash.

